ALPHA BRIDGE AS200/10/I2S4P Managed Industrial PoE Switch
Product Overview
The AS200/10/I2S4P is a highly reliable industrial managed PoE Switch with 4-port 10/100/1000-T PoE and 2-port 1000Base-X fiber optical interfaces. It complies with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. With its high-performance switching capacity, it supports ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. AS200/10/I2S4P supports Web/SNMP/Telnet management, the anaged features are such as QoS, VLAN, IGMP, Port mirroring, 802.1X, LLDP, Fiber transceiver DDM, PoE management and so on.
AS200/10/I2S4P is also a high cost-effective easy-to-use device, which provides essential industrial Ethernet networking function, including wide range power input 44-57VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 75°C as well as high-level EMI/EMC capability. It is the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and crucial
Features
- 4*10/100/1000Base-T RJ45 PoE ports, 2*1000Base-X SFP ports
- DC 44~57V input, redundant power supply with polarity reverse/over-voltage protection
- Complies with 3af PoE and IEEE802.3at PoE+ standard
- Support Layer 2 management function: VLAN/Port Mirroring/IGMP/QoS/LLDP/802.1X/Fiber transceiver DDM
- Support 8032 ERPS protocol, recovery time ≤20ms
- Support 4KV surge protection and ESD: Air-15kV, Contact-8kV Protection
- IP40 fan-less and Din-rail hardware design
- Operation temperature: -40 ℃ ~+75℃
Technical specification
| Model No. | AS200/10/I2S4P | |
| Interface | Fiber ports | Copper RJ45 ports |
| 2 | 4 | |
| Ethernet | 4*10/100/1000Base-T RJ45 PoE 2*100/1000Base-X SFP（SC/ST/FC optional） | |
| Management port | 1*RJ45 Console | |
| Standard | IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-X IEEE 802.3x flow control and back pressure IEEE 802.1D spanning tree protocol IEEE 802.1w rapid spanning tree protocol IEEE 802.1Q VLAN tagging ITU-T G.8032 ERPS IEEE 802.1X port authentication network control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE802.3af Power Over Ethernet IEEE802.3at Power Over Ethernet plus PSE | |
| LED Indicators | ||
| P(Power indicator) | Off: the device is power off or failed | Off: the device is power off or failed |
| S(System status indicator) | Blinking: device initialization | On: device on normal operation |
| 1-4 (Copper ports） | Green | Yellow |
| Off:ports link down | Off: PoE not working | |
| On: ports link up | On: PoE working | |
| Blinking: data on TX/RX | ||
| 5-6（fiber ports) Green | Off: ports link down | |
| On: ports link up | ||
| Blinking: data on TX/RX | ||
| Power parameter | ||
| Input voltage | 44-57VDC, redundant power input | |
| Input current | 3A Max | |
| Total consumption | Full loading without PoE ≤6W PoE power budget ≤120W | |
| Connector | Removable 4-pin terminal block | |
| Reverse polarity protection | Support | |
| Over-voltage protection | Support | |
| Layer 2 function | ||
| Port aggregation | Support static aggregation Support dynamic aggregation | |
| Port features | Support IEEE802.3x flow control Support Port traffic statistics Support port isolation Support network storm suppression based on port bandwidth percentage | |
| VLAN | Support access mode Support trunk mode Support hybrid mode | |
| Port mirroring | Support many to one port mirroring | |
| Ring network protocol | Support STP, RSTP Support G.8032 ERPS protocol, single ring, sub Ring and associated sub ring Recovery time ≤20ms | |
| Multicast | IGMP V1,V2,V3 IGMP snooping | |
| QoS | Ingress Port-based Rate-limit Egress Port-based Rate-limit | |
| Security features | Support 802.1x, port authentication, MAC authentication, RADIUS service Support port isolation | |
| Management and maintenance | Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON(Remote Monitoring) alarm Support NTP Support Ping , Tracert Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support PoE management Support TFTP, web upgrading | |
| Switching features | ||
| Switching capacity | 12Gbps | |
| Packet forwarding rate | 17.8Mpps | |
| MAC address table | 8K | |
| VLAN | 4K | |
| Buffer | 1M bit | |
| Forwarding delay | <5us | |
| Jumbo Frame | Support 10Kbytes | |
| MDX/MIDX | Support | |
| Watchdog | Support | |
| Mechanical structure | ||
| Case protection | IP40 | |
| Installation method | Din-rail | |
| Dimension(W*D*H)mm | 30*98*130mm | |
| Weight | 0.56 kg | |
| Operating environment | ||
| Operating temperature | -40℃~+75℃ | |
| Storage/transportation temperature) | -40℃~+85℃ | |
| Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | |
| Industrial Standard | Surge protection of power: IEC 61000-4-5 Level 3 (4KV/2KV）（8/20us) | |
| Surge protection of Ethernet ports: IEC 61000-4-5 Level 3 (4KV/2KV）（10/700us) | ||
| DIP: IEC 61000-4-11 Level 3（10V） | ||
| ESD: IEC 61000-4-2 Level 4（8K/15K） | ||
| Shock: IEC 60068-2-27 | ||
| Free fall: IEC 60068-2-32 | ||
| Vibration: IEC 60068-2-6 | ||
Ordering Information
| Model | Description |
| AS200/10/I2S4P | Managed industrial 10/100/1000M 4POE and 2SFP, IEEE802.3af, IEEE802.3at standard, DC44-57V, redundant dual power supply, Din-rail installation. Fiber ports transmission distance depending on the SFP module; Operation temperature: -40℃ ～+75℃ |
