Alpha Bridge AQSFP-40G-LR4

Features

  • Compliant with 40G Ethernet 3ba and 40GBASE-LR4 Standard
  • QSFP+ MSA compliant
  • Compliant with QDR/DDR Infiniband data rates
  • Up to 2Gb/s data rate per wavelength
  • 4 CWDM lanes MUX/DEMUX design
  • Up to 10km transmission on single mode fiber (SMF)
  • Commercial case temperature: 0°C to 70°C
  • Maximum power consumption 5W
  • LC duplex connector
  • RoHS compliant
  •  

Applications

  • 40GBASE-LR4 Ethernet Links
  • Infiniband QDR and DDR interconnects
  • Client-side 40G Telecom connections

Absolute Maximum Ratings

Parameter Symbol Min. Max. Units Note
Storage Ambient Temperature TSTG -40 85 °C  
Operating Case Temperature TOP 0 70 °C  
Power Supply Voltage Vcc -0.5 3.6 V  
Relative Humidity (non-condensation) RH 0 85 %  
Damaged Threshold , each Lane THd 3.3   dBm  

Recommended Operating Conditions

Parameter Symbol Min Typ. Max Unit
Operating Case Temperature TOP 0   70 °C
Power Supply Voltage Vcc 3.135 3.3 3.465 V
Data Rate, each Lane     10.3125 11.2 Gb/s
Control Input Voltage High   2   Vcc V
Control Input Voltage Low   0   0.8 V
Link Distance with G.652 D     10 km

Diagnostics Monitoring

Parameter Symbol Accuracy Units Notes
Temperature monitor absolute error DMI_Temp ±3 ℃ Over operating temperature range
Supply voltage monitor absolute error DMI _VCC ±0.1 V Over full operating range
Channel RX power monitor absolute error DMI_RX_Ch ±2 dB 1
Channel Bias current monitor DMI_Ibias_Ch ±10% mA  
Channel TX power monitor absolute error DMI_TX_Ch ±2 dB 1

Optical Characteristics

Parameter Symbol Min Type Max Unit Notes
Wavelength Assignment L0 1264.5 1271 1277.5 nm  
L1 1284.5 1291 1297.5 nm
L2 1304.5 1311 1317.5 nm
L3 1324.5 1331 1337.5 nm
Transmitter
Side Mode Suppression Ratio SMSR 30     dB  
Total Average Launch Power PT   8.3 dBm  
Average Launch Power, each lane PAVG -7 2.3 dBm  
Optical Modulation Amplitude (OMA) each POMA -4 3.5 dBm 1
Difference in Launch Power between any Ptx,diff   6.5 dB  
Two Lanes (OMA) Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP) each lane   -4.8     dBm  
 TDP, each lane TDP   2.6 dB  
Extinction Ratio ER 3.5   dB  
Relative Intensity Noise RIN   -128 dB/Hz 12dB reflection
Optical Return Loss Tolerance TOL   20 dB  
Transmitter Reflectance RT   -12 dB  
Transmitter Eye Mask Definition (X1, X2, X3, Y1, Y2, Y3) {0.25,0.4,0.45,0.25,0.28,0.4}
Average Launch Power OFF Transmitter each lane Poff   -30 dBm  
Receiver
Damage Threshold, each lane THd 3.3     dBm 2
Total Average Receive Power     8.3   dBm  
Average Receive Power, each lane   -13.7 2.3   dBm  
Receiver Reflectance RR   -26   dB  
Receiver Power (OMA) each lane     3.5   dBm  
Receiver Sensitivity (OMA) each lane SEN   -11.5   dBm  
Stressed Receiver Sensitivity (OMA) each lane       -9.6 dBm 3
Difference in Receiver Power between any            
Two Lanes (OMA) Prx,diff     7.5 dB  
LOS Assert LOSA -28     dBm  
LOS Deassert LOSD     -15 dBm  
LOS Hysteresis LOSH 0.5     dB  
Receiver Electrical 3 dB upper Cutoff            
Frequency each lane Fc     12.3 GHz  
Frequency each lane Fc     12.3 GHz  

Electronical Characteristics

Parameter Symbol Min. Typ. Max. Units Note
Power Consumption       3.5 W  
Supply Current Icc     1.1 A  
Transceiver Power-on Initialization Time     2000   ms 1
Transmitter (each lane)
Single-ended Input Voltage Tolerance (Note 2)   -0.3   4 V Referred to TP1 signal common
AC Common Mode Input Voltage Tolerance   15     mV RMS
Differential Input Voltage Swing Threshold   mVpp LOSA Threshold
Differential Input Voltage Swing Vin,pp mVpp  
Differential Input Impedance Zin 90 100 110 Ohm  
Differential Input Return Loss See IEEE 802.3ba 86A.4.11 dB 10MHz-11.1GHz
J2 Jitter Tolerance Jt2 0.17     UI  
J9 Jitter Tolerance Jt9 0.29 UI  
Data Dependent Pulse Width          
Shrinkage (DDPWS) Tolerance   0.07 UI  
Eye Mask Coordinates (X1, X2, Y1, Y2) 0.11, 0.31, 95, 350
Receiver (each Lane)
Single-ended Output Voltage   -0.3 V Referred to signal common
AC Common Mode Output Voltage     mV RMS
Differential Output Impedance Zout 90 100 Ohm  
Termination Mismatch at 1MHz       %  
Differential Output Return Loss See IEEE 802.3ba 86A.4.2.1  dB
Common Mode Output Return Loss See IEEE 802.3ba 86A.4.2.2  dB
Output Transition Time   28   ps 20% to 80%
J2 Jitter Output Jo2 UI  
J9 Jitter Output Jo9     UI  
Eye Mask Coordinates {X1, X2 Y1, Y2} 0.29, 0.5, 150, 425 UI mV Hit Ration=5x10-5

Pin Assignment

PIN Logic Symbol Description Note
1   GND Ground 1
2 CML-I Tx2n Transmitter Inverted Data Input  
3 CML-I Tx2p Transmitter Non-Inverted Data output  
4   GND Ground 1
5 CML-I Tx4n Transmitter inverted Data Input  
6 CML-I Tx4p Transmitter Non-Inverted Data output  
7   GND Ground 1
8 LVTLL-I ModSeIL Module Select  
9 LVTLL-I ResetL Module Reset  
10   VccRx +3.3V Power Supply Receiver 2
11 LVCMOS-I/O SCL 2-Wire Serial Interface Clock  
12 LVCMOS-I/O SDA 2-Wire Serial Interface Data  
13   GNC Ground  
14 CML-O Rx3p Receiver Non-Inverted Data output  
15 CML-O Rx3n Receiver Inverted Data output  
16   GND Ground 1
17 CML-O Rx1p Receiver Non-Inverted Data Output  
18 CML-O Rx1n Receiver Inverted Data Output  
19   GND Ground 1
20   GND Ground 1
21 CML-O Rx2n Receiver Inverted Data output  
22 CML-O Rx2p Receiver Non-Inverted Data output  
23   GND Ground 1
24 CML-O Rx4n Receiver Inverted Data output 1
25 CML-O Rx4p Receiver Non-Inverted Data output  
26   GND Ground 1
27 LVTTL-O ModPrsL Module Present  
28 LVTTL-O IntL Interrupt  
29   VccTx +3.3V Power Supply transmitter 2
30   Vcc1 +3.3V Power Supply 2
31 LVTTL-I LPMode Low Power Mode  
32   GND Ground 1
33 CML-I Tx3p Transmitter Non-Inverted Data Input  
34 CML-I Tx3n Transmitter Inverted Data Output  
35   GND Ground 1
36 CML-I Tx1p Transmitter Non-Inverted Data Input  
37 CML-I Tx1n Transmitter Inverted Data Output  
38   GND Ground 1

Ordering Information

Model Number Part Number Voltage Temperature
AQSFP-40G-LR4 OPCS-S10-13-CB 3.3V 0°C to 70 °C
Download Brochure
Scroll to Top