Alpha Bridge AXFP-10G-ZR+

Features

  • 4 CWDM lanes MUX/DEMUX design.
  • Up to 2Gb/s data rate per wavelength.
  • QSFP+ MSA compliant.
  • IEEE 3ba Electrical Interface.
  • Digital diagnostic capabilities.
  • Compliant with QDR/DDR Infiniband data rates.
  • Up to 150m transmission on OM3 multimode fiber (MMF) or 2km transmission on single mode fiber (SMF).
  • Operating case temperature: 0 to 70℃.
  • Maximum power consumption 5W.
  • LC duplex connector.

Applications

  • 40GBASE-LX4 Ethernet Links.
  • Infiniband QDR and DDR interconnects.
  • Client-side 40G datacom connections.

Absolute Maximum Ratings AXFP-10G-ZR+

Parameter Symbol Min Max Unit
Storage Temperature Ts -40 85 °C
Operating Case Temperature TOP 0 70 °C
Power Supply Voltage Vcc -0.5 3.6 V
Relative Humidity (non-condensation) RH 0 85 %
Damage Threshold, each Lane THd 4.5   dBm

Recommended Operating Conditions AXFP-10G-ZR+

Parameter Symbol Min Typical Max Unit
Operating Case Temperature TOP 0   +70 °C
Power Supply Voltage Vcc 3.135 3.3 3.465 V
Data Rate, each Lane     10.3125 11.2 Gb/s
Control Input Voltage High   2   Vcc V
Control Input Voltage Low   0   0.8 V
Link Distance with (OM3 MMF) D_MMF     150 m
Link Distance (SMF) D_SMF     2 km

Electrical Characteristics AXFP-10G-ZR+

Parameter Symbol Min Typical Max Unit Notes
Power Consumption       3.5 W  
Supply Current Icc     1.1 A  
Transceiver Power-on Initialization Time       2000 ms 1

Optical Characteristics AXFP-10G-ZR+

Parameter           Symbol Min Typical Max Unit Notes
Wavelength assignment L0 1264.5 1271 1277.5 nm  
L1 1284.5 1291 1297.5 nm  
L2 1304.5 1311 1317.5 nm  
L3 1324.5 1331 1337.5 nm  

Transmitter Electro-optical Characteristics AXFP-10G-ZR+

Parameter Symbol Min. Typ.                Max. Units Note
Operating Date Rate   9.95 11.3 Gbps  
Input Reference Clock Rate     Not Required    
Output Optical Power Pout 1 ---             4 dBm  
Extinction Ratio ER 9   dB  
Center Wavelength °C 1530 1565 nm  
Sidemode Supression ratio SSRmin 30     dB
Relative Intensity Noise RIN --- ---          -130 dB/Hz  
Output Eye Compliant with IEEE802.3ae
Differential Input Voltage VDIFF 0.12 --- 1.0
Transmit Fault Output-Low TX_FAULTL 0.0 --- 0.5
Transmit Fault Output-High TX_FAULTH 2.4 --- Vcc
TX_DISABLE Assert Time t_off --- --- 10
TX_DISABLE Negate Time t_on --- --- 2
Time to initialize t_init --- --- 300
Interrupt assert delay Interrupt _on --- --- 200
Interrupt negate delay Interrupt_off --- --- 500
P_Down/RST assert delay P_Down/RST_on     100
Mod_NR assert delay Mod_nr_on     1
Mod_NR negate delay Mod_nr_off     1
P-Down reset time   10    
RX_LOS assert delay t_loss_on     100

Receiver Electro-optical Characteristics AXFP-10G-ZR+

Parameter Symbol Min. Typ. Max. Units Note
Optical Input Power-maximum PIN -7 --- --- dBm BER < 10-12
Receiver Sensitivity PIN --- --- -24 dBm BER < 10-12
Receiver Sensitivity (OMA) PIN --- --- -22.1 dBm BER < 10-12
Operating Center Wavelength C 1270 --- 1600 nm  
Receiver Reflectance Rrx 27 --- --- dB  
Dispersion Panelty       3 dB Up to 80 km
Loss of Signal-Asserted PA --- --- -30 dBm  
Loss of Signal-Deasserted PD -22 --- --- dBm  
Differential Output Voltage VDIFF 0.6   0.8 V  
TTL Input High Voltage   2   Vcc V  
TTL Input Low Voltage   0   0.8 V  
TTL output High Voltage   2.4 --- Vcc V  
TTL output Low Voltage   0 --- 0.4 V  
Receiver Loss of Signal Assert Time                                                                           tA,RX_LOS                                                                                                              --- --- 100 μs  
Recover Loss of Signal Assert Time                                                                           tD,RX_LOS                                                                                                              --- --- 100 μs  

Ordering Information AXFP-10G-ZR+

Model Number Part Number Reach Input/Output Signal Detect Voltage Temprature
XFP-ZR+ OP7K-SA0-15-C 25dB AC/AC TTL 3.3V -5°C to 70°C
Download Brochure
Scroll to Top