Alpha Bridge AQSDH-T-A5-PBV

Features

  • Up to 800Gb/s data rate
  • 8x100Gb/s PAM4 modulation
  • Compatible to QSFP-DD Hardware Specification
  • Compatible to IEEE802.3cK
  • Hot-pluggable
  • Power Supply Voltage: 3W
  • RoHS compliant
  • Operating temperature range: 0℃ to 70℃

Application

  • Switches, Servers, RouterS, Storage Arrays
  • Networking Equipment
  • Data Cables
  • Telecommunications Central Offices
  • Test and Measurement Equipment
  • Test and Measurement Equipment

Description

Alpha Bridge QSFP-DD800 (Double Density) Passive Direct Attach Copper Cable features 8 transmitting and 8 receiving 100Gbps PAM4 channels for 800G operation. The cable assembly meets IEEE 802.3ck 400GBase -CR4, 200Gbase-CR2 and 100GBase-CR1 standards with substantial signal integrity margin providing high performance and bandwidth interconnect solutions for high-density applications.

As next-gen data centres deploy faster speed in a tighter space, they need high performance cables that reduce power consumption, provide reliable operation and are low cost. AlphaBridge QSFP-DD800 cable is designed to meet the next-gen data centre needs. With unique foam dielectric construction, Volex QSFP-DD800 cable offers smallest cable outer diameter and bend radius, and highest flexibility, while meeting or exceeding the MSA signal integrity specification.

Absolute Maximum Ratings

Parameter Symbol Min. Typ. Max. Units
Storage Temperature TS -40   85 ℃
Supply Voltage VCC3 3.135   3.465 V
Relative Humidity (non-condensation) RS 5   85 %

  Recommended Operating Conditions & Power Supply Requirements

Parameter Symbol Min. Typ. Max. Units
Operating Case Temperature TOP 0   70 ℃
Power Supply Voltage VCC3 3.135   3.465 V
Voltage on LVTTL Input ViIvttl -0.3   VCC3 +0.2 V
Power Supply Current Icc3 0.001     mA

Frequency Domain

Item Test Parameter IEEE802.3ck Specification
  1   Differential Insertion Loss (SDD21) Maximum insertion loss at 26.56GHz -17.16dB Minimum insertion loss at 26.56GHz -8dB
  2   Common Mode Reflection (SCC11/SCC22) -1.4dB @ 0.05 to 6GHz -0.68-0.12*(f) @ 6 to 30GHz -10.28+0.2*(f) @ 30 to 40GHz
  3 Common Mode Conversion (SCD11/SCD22) -22+(10/25.56)*(f) @ 0.05 to 26.56GHz -15+(3/25.56)*(f) @ 26.56 to 40GHz
  4 Differential to Common Mode Conversion Loss (SCD21-SDD21) -10dB @ 0.05 to 12.89GHz -14+0.3108*(f) @ 12.89 to 40GHz
5 Channel Operating Margin (COM) 3dB Minimum
  6   Effective Return Loss (ERL) * 8.25 dB Minimum. Cable assemblies with a COM greater than 4 dB are not required to meet minimum ERL
7 Insertion Loss* (SDD21) for 0.5M 30awg 25.65GHz : -14.55 dB Max
Insertion Loss* (SDD21) for 1.0M 28awg 25.65GHz : -16.75 dB Max
Insertion Loss* (SDD21) for 1.5M 26awg 25.65GHz : -17.45 dB Max
Insertion Loss* (SDD21) for 2.0M 26awg 25.65GHz : -19.75 dB Max

Pin Description

Pin Logic Symbol Description Notes
1   GND Ground 1
2 CML-I Tx2n Transmitter Inverted Data Input  
3 CML-I Tx2p Transmitter Non-Inverted Data Input  
4   GND Ground 1
5 CML-I Tx4n Transmitter Inverted Data Input  
6 CML-I Tx4p Transmitter Non-Inverted Data Input  
7   GND Ground 1
8 LVTTL-I ModSeIL Module Select  
9 LVTTL-I ResetL Module Reset  
10   Vcc Rx +3.3V Power Supply Receiver  
11 LVCMOSI/O SCL 2-wire serial interface clock 2
12 LVCMOSI/O SDA 2-wire serial interface data 2
13   GND Ground 1
14 CML-O Rx3p Receiver Non-Inverted Data Output  
15 CML-O Rx3n Receiver Inverted Data Output  
16   GND Ground 1
17 CML-O Rx1p Receiver Non-Inverted Data Output  
18 CML-O Rx1n Receiver Inverted Data Output  
19   GND Ground 1
20   GND Ground 1
21 CML-O Rx2n Receiver Inverted Data Output  
22 CML-O Rx2p Receiver Non-Inverted Data Output  
23   GND Ground 1
24 CML-O Rx4n Receiver Inverted Data Output  
25 CML-O Rx4p Receiver Non-Inverted Data Output  
26   GND Ground 1
27 LVTTL-O ModPrsL Module Present 2
28 LVTTL-O IntL Interrupt 2
29   Vcc Tx +3.3V Power Supply transmitter  
30   Vcc1 +3.3V Power Supply  
31 LVTTL-I LPMode Low Power Mode  
32   GND Ground 1
33 CML-I Tx3p Transmitter Non-Inverted Data Input  
34 CML-I Tx3n Transmitter Inverted Data Input  
35   GND Ground 1
36 CML-I Tx1p Transmitter Non-Inverted Data Input  
37 CML-I Tx1n Transmitter Inverted Data Input  
38   GND Ground 1
39   GND Ground  
40 CML-I Tx6n Transmitter Inverted Data Input  
41 CML-I Tx6p Transmitter Non-Inverted Data output  
42   GND Ground  
43 CML-I Tx8n Transmitter Inverted Data Input  
44 CML-I Tx8p Transmitter Non-Inverted Data output  
45   GND Ground  
46 LVCMOS/CML-I P/VS4 Programmable/Module Vendor Specific 4  
47 LVCMOS/CML-I P/VS1 Programmable/Module Vendor Specific 1  
48   VccRx1 ﹢3.3V Power Supply  
49 LVCMOS/CML-O P/VS2 Programmable/Module Vendor Specific 2  
50 LVCMOS/CML-O P/VS3 Programmable/Module Vendor Specific 3  
51   GND Ground  
52 CML-O Rx7p Receiver Non-Inverted Data Output  
53 CML-O Rx7n Receiver Inverted Data Output  
54   GND Ground  
55 CML-O Rx5p Receiver Non-Inverted Data Output  
56 CML-O Rx5n Receiver Inverted Data Output  
57   GND Ground  
58   GND Ground  
59 CML-O Rx6n Receiver Inverted Data Output  
60 CML-O Rx6p Receiver Non-Inverted Data Output  
61   GND Ground  
62 CML-O Rx8n Receiver Inverted Data Output  
63 CML-O Rx8p Receiver Non-Inverted Data Output  
64   GND Ground  
65   NC No Connect  
66   Reserved For future use  
67   VccTx +3.3 V Power Supply  
68   Vcc2 +3.3 V Power Supply  
69 LVCMOS-I ePPS/Clock 1PPS PTP clock or reference clock input  
70   GND Ground  
71 CML-I Tx7p Transmitter Non-Inverted Data Input  
72 CML-I Tx7n Transmitter Inverted Data Output  
73   GND Ground  
74 CML-I Tx5p Transmitter Non-Inverted Data Input  
75 CML-I Tx5n Transmitter Inverted Data Output  
76   GND Ground  

Ordering Information

Model  Number Part Number AWG Length Temperature
800G QSF-DD DAC-1.5M AQSDH-T-A5-PBV 26 1.5M 0°C to 70 °C
download brochure
Scroll to Top