ALPHA BRIDGE AS200/10/I4S8P Managed Industrial PoE Switch
Product Overview
Alpha Bridge AS200 Series are highly reliable managed industrial PoE switch with 8-port 10/100/1000-T PoE and 4-port 1000/2500Base-X fiber optical interfaces. They comply with IEEE802.3af, IEEE802.3at standard PoE protocol, the Max power consumption can reach 30W (PoE+) per port. They support ERPS redundant network and the self-recovery mechanism is less than 20ms on full load which allows you to scheme a reliable Ethernet network by building a redundant ring topology as your back-up solution. Alpha Bridge AS200 Series also support DI/DO/RS485/Modbus data and robust layer 2 management function, which can fulfill the special needs of industrial automation applications.
Alpha Bridge AS200 Series are also high cost-effective easy-to-use devices, which provide essential industrial Ethernet networking function, including wide range power input 44-57VDC, redundant power design with polarity reverse protection, robust IP40 fan-less housing with Din-rail installation, wide operation temperature from -40°C to 85°C as well as high-level EMI/EMC capability. They are the best choice for heavy industrial factory, transportation, oil & gas, chemical, IP Surveillance and processing automation area where environmental conditions are harsh and critical.
Features
- 8*10/100/1000Base-T RJ45 PoE ports, 4*1000/2500Base-X SFP slots
- Redundant power DC 44-57V input with polarity reverse/over-voltage/over-current protection
- Complies with 3af PoE and IEEE802.3at PoE+ standard
- Support USB one key configuration and upgrading
- Support DI/DO/RS485/Modbus data
- Support Layer 2 management function: VLAN/VLAN Classification/QinQ/STP, RSTP, MSTP/Port Mirroring/ DHCP /Multicast/ACL/IGMP/QoS/LLDP/802.1X/Dying Gasp/SFP
- DDM/PoE management/IPV6 management/Web/SNMP/Telnet/TFTP/Web upgrading
- Support 8032 ERPS protocol, recovery time ≤20ms
- Support 6KV surge protection and ESD: Air-15kV, Contact-8kV Protection
- IP40 fan-less and Din-rail hardware design
- Operation temperature: -40 ℃ ~+85℃
Technical Specification
| Model No. | AS200/10/I4S8P / AS200/10/I4S8P-D | |
| Interface | Fiber ports | Copper RJ45 ports |
| 4 | 8 | |
| Ethernet | 8*10/100/1000Base-T RJ45 PoE 4*1000/2500Base-X SFP | |
| Management port | 1*RJ45 Console port, 1*USB 2.0 (optional) | |
| Data channel (optional) | 1 channel RS485 1 channel DI(digital input) 1 channel DO(digital output) | |
| Standard | IEEE 802.3 10Base-T Ethernet IEEE 802.3u 100Base-TX Ethernet IEEE 802.3ab 1000Base-T Ethernet IEEE 802.3z 1000Base-X Ethernet IEEE802.3x Flow Control and Back Pressure IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1Q VLAN ITU-T G.8032 ERPS IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3ad LACP IEEE802.3af PoE IEEE802.3at PoE+ | |
| LED Indicators | ||
| P (Power indicator) | Off: the device is power off or failed | On: the device is power on is normal |
| S (System status indicator) | Blinking: device initialization | On: device on normal operation |
| USB (USB status indicator) | Off: USB flash drive not insert or not detected by device | |
| On: USB flash drive is detected by device | ||
| Blinking: the device is reading and writing the data from USB flash drive | ||
| ALM (Fault status indicator) Red | Off: Device on normal working state | On: Fault alarm |
| 1-8 (Copper ports indicators) Green | Off: ports link down | |
| On: ports link up | ||
| Blinking: data on TX/RX | ||
| 1-8 (PoE status indicators) Yellow | Off: PoE not working | |
| On: PoE working | ||
| 9-12 (Fiber ports indicators) Green | Off: ports link down | |
| On: ports link up | ||
| Blinking: data on TX/RX | ||
| Power parameter | ||
| Input voltage | 44-57VDC, redundant power input | |
| Input current | 5.6A Max | |
| Total power consumption | Full loading without PoE ≤10W PoE power budget ≤240W | |
| Connector | Removable 4-pin terminal block | |
| Reverse polarity protection | Support | |
| Over-voltage protection | Support | |
| Over-current protection | Support | |
| Layer 2 function | ||
| Port aggregation | Support GE port aggregation Support 2.5GE aggregation Support static aggregation Support dynamic aggregation | |
| Port features | Support IEEE802.3x flow control, Support port traffic statistics, Support port isolation Support network storm suppression based on port bandwidth percentage | |
| VLAN | Support access mode Support trunk mode Support hybrid mode | |
| VLAN Classification | Mac Based VLAN IP Based VLAN Protocol Based VLAN | |
| QinQ | Port-based QinQ VLAN-based QinQ Flow-based QinQ | |
| Port mirroring | Many to one port mirroring | |
| Ring network protocol | Support STP, RSTP, MSTP Support G.8032 ERPS protocol, single ring, sub Ring and associated sub ring Recovery time ≤20ms | |
| DHCP | Support DHCP Client Support DHCP Snooping | |
| Multicast | IGMP V1,V2,V3 IGMP snooping | |
| ACL | IP Standard ACL MAC extend ACL IP extend ACL | |
| QoS | Support QoS Class, Remarking Support SP, WRR queue scheduling Ingress Port-based Rate-limit Egress Port-based Rate-limit Support Policy-based QoS | |
| Security | Support Dot1x, port authentication, MAC authentication, RADIUS service Support port-security Support IP Source Guard, IP/Port/MAC binding Support ARP-check and ARP packet filtering for illegal users Support port isolation | |
| Management & maintenance | Support LLDP Support user management and login authentication Support SNMPV1/V2C/V3 Support web management, HTTP1.1, HTTPS Support Syslog and alarm grading Support RMON(Remote Monitoring) alarm Support NTP Support temperature monitoring Support Ping, TRACERT Support optical transceiver DDM function Support TFTP Client Support Telnet Server Support SSH Server Support IPv6 Management Support PoE management Support TFTP, web upgrading Support USB upgrading Support USB importing configuration | |
| Switching features | ||
| Switching capacity | 26Gbps | |
| Packet forwarding rate | 38.6Mpps | |
| MAC address table | 16K | |
| VLAN | 4K | |
| Buffer | 12Mbit | |
| Forwarding delay | <5us | |
| Jumbo Frame | Support 10Kbytes | |
| MDX/MIDX | Support | |
| Watchdog | Support | |
| Mechanical structure | ||
| Case protection | IP40 | |
| Installation method | Din-rail | |
| Dimension(W*D*H) mm | 54*115*158mm | |
| Weight | AS200/10/I4S8P (1.10 kg)/ AS200/10/I4S8P-D ( 1.30 kg) | |
| Operating environment | ||
| Operating temperature | -40℃~+85℃ | |
| Storage/transportation temperature | -40℃~+85℃ | |
| Relative humidity | Operation humidity: 10%-90%RH Storage humidity: 5%-95%RH | |
| Industrial Standard | ||
| EMS | Surge protection of power: IEC 61000-4-5 6KV/4KV (8/20us) Surge protection of Ethernet ports: IEC 61000-4-5 6KV/2KV (10/700us) RS: IEC 61000-4-3 80 MHz-1 GHz: 10 V/m EFT: IEC 61000-4-4 4K/2K CS: IEC 61000-4-6 10V ESD: IEC 61000-4-2 Contact: 8K; Air: 15K | |
| EMI | FCC Part 15B Class A | |
| Shock | IEC 60068-2-27 | |
| Free fall | IEC 60068-2-32 | |
| Vibration | IEC 60068-2-6 | |
| Certification | CCC/CE/FCC/RoHS | |
Ordering Information
| Part Number | Product Description |
| AS200/10/I4S8P | Managed industrial PoE switch with 8*10/100/1000Base-T RJ45 PoE ports and 4*1G/2.5GBase-X SFP slots, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V input, redundant dual power supply, Din-rail installation. Operation temperature: -40℃～+85℃ |
| AS200/10/I4S8P-D | Managed industrial PoE switch with 8*10/100/1000Base-T RJ45 PoE ports and 4*1G/2.5GBase-X SFP slots, supports DI/DO/RS485/Modbus data, complies with IEEE802.3af, IEEE802.3at standard, DC44-57V input, redundant dual power supply, Din-rail installation; Operation temperature: -40℃～+85℃ |
