Alpha Bridge AB-SFP+-60 Datasheet

Features

  • Compliant with SFF-8431 and IEE802.3ae
  • Data rate selectable ≤4.25Gbps or 9.95Gbps to 11.3Gbps bit rates
  • Cooled EML transmitter and APD receiver
  • link length up to 60km
  • Low Power Dissipation 1.4W Typical (Maximum:2W)
  • Single 3.3V power supply
  • Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
  • RoHS compliant and lead-free

Applications

  • 10G Ethernet
  • 10G Fiber Channel (with/without FEC)

Description

SFP+ZR Transceiver is designed for 8.5G/10G Fiber-Channel and 10GBE applications. The transceiver consists of two sections: The transmitter section incorporates a cold EML laser. The receiver section consists of an APD photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. SFP+ZR Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power, and transceiver supply voltage.

Absolute Maximum Ratings

Parameter Symbol Min Max Unit
Supply Voltage Vcc -0.5 3.8 V
Storage Temperature Tst -40 85 ºC
Relative Humidity Rh 0 85 %

Operating Conditions

Parameter Symbol Min Typical Max Unit
Supply Voltage Vcc 3.13 3.3 3.47 V
Supply current [1] Icc   420 610 mA
Operating Case Temperature Tca -5 - 70 ºC
Module Power Dissipation [2] Pm - 1.4 2 W

Transmitter Specifications – Optical

Parameter Symbol Min Typical Max Unit
Center Wavelength c 1528   1565 nm
Optical Average Power Po 0 - 4 dBm
Side Mode Suppression Ratio SMSR 30 - - dB
Optical Transmit Power (disabled) PTX_DISABLE - - -30 dBm
Extinction Ratio ER 9   - dB
RIN21OMA       -128 dB/Hz
Optical Return Loss Tolerance       21 dB
Dispersion penalty(1600ps/nm) DP     2 dB

Transmitter Specifications – Electrical

Parameter Symbol Min Typical Max Unit
Data Rate Mra - 10.3 11.3 Gbps
Input differential impedance Rim - 100 - Ω
Differential data Input VtxDIFF 120 - 850 mV
Transmit Disable Voltage VD 2 - Vcc3+0.3 V
Transmit Enable Voltage Ven 0 - 0.8 V
Transmit Disable Assert Time Vn - - 100 us

Receiver Specifications – Optical

Parameter Symbol Min Typical Max Unit
Input Operating Wavelength λ 1110 - 1650 nm
Receiver sensitivity [1]   - - -24 dBm
Maximum Input Power RX-overload - - -8 dBm
Loss of Signal Asserted   -34 - - dBm
LOS De-Asserted   - - -24 dBm

Receiver Specifications – Electrical

Parameter Symbol Min Typical Max Unit
Data Rate Mra - 10.3 11.3 Gbps
Differential Output Swing Vout P-P 350 - 850 mV
Rise/Fall Time Tr / Tf 24 - - ps
Loss of Signal –Asserted VOH 2 - Vcc3+0.3- V
Loss of Signal –Negated VOL 0 - 0.4 V

Pin Descriptions

Pin Symbol Name/Description
1 VEET [1] Transmitter Ground
2 Tx_FAULT [2] Transmitter Fault
3 Tx_DIS Transmitter Disable. Laser output disabled on high or open
4 SDA [2] 2-wire Serial Interface Data Line
5 SCL [2] 2-wire Serial Interface Clock Line
6 MOD_ABS [4] Module Absent. Grounded within the module
7 RS0 [5] RS0 for Rate Select: Open or Low = Module supports ≤4.25Gbps High = Module supports 9.95 Gb/s to 10.3125 Gb/s
8 RX_LOS [2] Loss of Signal indication. Logic 0 indicates normal operation
9 RS1 [5] No connection required
10 VEER [1] Receiver Ground
11 VEER [1] Receiver Ground
12 RD- Receiver Inverted DATA out. AC Coupled
13 RD+ Receiver DATA out. AC Coupled
14 VEER [1] Receiver Ground
15 VCCR Receiver Power Supply
16 VCCT Transmitter Power Supply
17 VEET [1] Transmitter Ground
18 TD+ Transmitter DATA in. AC Coupled
19 TD- Transmitter Inverted DATA in. AC Coupled
20 VEET [1] Transmitter Ground

Ordering Information

Part Number Product Description
AB-SFP+-60 10Gbps 1550nm 60km LC SFP+, 0ºC ~ +70ºC
AB-SFP+-60- I 10Gbps 1550nm 60km LC SFP+, -40ºC ~ +85ºC
download brochure
Scroll to Top