Alpha Bridge ASFP-10G-T80-I Datasheet

Features

• Up to 10Gb/s bi-directional data links
• Hot-pluggable SFP+ footprint
• Fully metallic enclosure for low EMI
• Low power dissipation
• Compact RJ-45 connector assembly
• Access to physical layer IC via 2-wire serial bus
• Supports Links up to 80m using Cat 6a/7 Cable
• RoHS Compliant
• Operating case temperature: -40℃ to 85℃

Applications

• 10 Gigabit Ethernet over Cat 6a/7 cable

+3.3V Volt Electrical Power Interface

Parameter	Symbol	Min	Typ.	Max	Units	Notes/Conditions
Supply Current	Is			850	mA	2.8W max power over full range of voltage and temperature. See caution note below
Input Voltage	Vcc	3.13	3.3	3.47	V	Referenced to GND
Maximum Voltage	Vmax			3.8	V
Surge Current	Isurge			30	mA	Hot plug above steady state current.

General Specifications

Parameter	Symbol	Min	Typ.	Max	Units	Notes/Conditions
Data Rate	BR		10.3		Gb/sec	IEEE 802.3 compatible.
Cable Length	L			80	m	Category 6a/7 UTP. BER <10-12

Environmental Specifications

Parameter	Symbol	Min	Typ.	Max	Units	Notes/Conditions
Operating Temperature	Top	-40		85	°C	Case temperature
Storage Temperature	Tsto	-40		85	°C	Ambient temperature

Pin Definitions

Pin	Signal Name	Description	Plug Seq.	Notes
1	VEET	Transmitter Ground	1
2	TX FAULT	Transmitter Fault Indication	3	Not supported
3	TX DISABLE	Transmitter Disable	3
4	SDA	SDA Serial Data Signal	3
5	SCL	SCL Serial Clock Signal	3
6	MOD_ABS	Module Absent. Grounded within the module	3
7	RS0	Not Connected	3
8	LOS	Loss of Signal	3
9	RS1	Not Connected	3
10	VEER	Receiver ground	1
11	VEER	Receiver ground	1
12	RD-	Inv. Received Data Out	3
13	RD+	Received Data Out	3
14	VEER	Receiver ground	1
15	VCCR	Receiver Power Supply	2
16	VCCT	Transmitter Power Supply	2
17	VEET	Transmitter Ground	1
18	TD+	Transmit Data In	3
19	TD-	Inv. Transmit Data In	3
20	VEET	Transmitter Ground	1

Ordering Information

Part Number	Tx_DIS	Link Indicator on Rx_LOS Pin	Temp.
ASFP-10G-T80-I	Yes	Yes	0~70°C

Download Brochure